Search results

This paper aims to focus on three-dimensional (3D) numerical simulation of a monitored urban underground road consisting of diaphragm walls supported by one row of temporary steel struts and a cover slab in the central area. In addition to the lateral wall displacements, the analysis focuses on the load development in the struts and the evolution of the total stresses at the soil–wall interface, and highlights the 3D effect on the behavior of the structure.

Computation by back-analysis has become an important contribution to the understanding of observed phenomena. In this context, this paper investigates a full 3D numerical back-analysis of diaphragm wall deformation using the finite difference code FLAC3D.

The instrumentation allows a deep understanding of the ground response and the soil-structure interaction phenomena. It also provides an opportunity to validate numerical models. Using a soil model with simple failure criteria, the wall displacements are strongly influenced by the soil deformation modulus. The strut stiffness considerably influences the wall behavior. The geometrical effects have a significant impact on the induced wall displacements.

In the present study, the main soil geotechnical characteristics were deduced from laboratory and in situ tests. However, Young’s modulus of the soil has been adjusted to take account of the unloading effect. In the same context, the non-linearity of the elastic characteristics of the steel struts has been taken into account by modeling the struts using their experimental stiffness instead of their theoretical rigidity.

This paper aims to investigate single pile and pile group responses due to deep braced excavation-induced soil movement in soft clay overlying dense sand. The analysis focuses first on the response of vertical single pile in terms of induced bending moment, lateral deflection, induced axial force, skin resistance distribution and pile settlement. To better understand the single pile behaviour, a parametric study was carried out. To provide further insights about the response of pile group system, different pile group configurations were considered.

Using the explicit finite element code PLAXIS 3 D, a full three-dimensional numerical analysis is carried out to investigate pile responses when performing an adjacent deep braced excavation. The numerical model was validated based on the results of a centrifuge test. The relevance of the 3 D model is also judged by comparison with the 2 D plane strain model using the PLAXIS 2 D code.

The results obtained allowed a thorough understanding of the pile response and the soil–pile–structure interactions phenomenon. The findings reveal that the deep excavation may cause appreciable bending moments, lateral deflections and axial forces in nearby piles. The parametric study showed that the pile responses are strongly influenced by the excavation depth, relative pile location, sand density, excavation support system and pile length. It also showed that the response of a pile within a group depends on its location in relation to the other piles of the pile group, its distance from the retaining wall and the number of piles in the group.

Unlike previous studies which investigated the problem in homogeneous geological context (sand or clay), in this paper, the pile response was thoroughly studied in a multi-layered soil using 3 D numerical simulation. To take into account the small-strain nonlinear behaviour of the soil, the Hardening soil model with small-strain stiffness was used in this analysis. For a preliminary design, this numerical study can serve as a practical basis for similar projects.

This paper aims to investigate the pile group efficiency based on the load-settlement response in soft clay conditions, considering several pile configurations using a variable number of piles and pile spacing. The overall objective of the present paper is to provide further insight into the mechanical response of the pile group and aim at helping the engineers in taking a logical path in an iterative design process for pile group efficiency.

To investigate the pile group efficiency, three-dimensional (3D) numerical simulations were performed using the finite-difference code FLAC3D.

The obtained numerical results are validated by comparing them to those of similar subgrade structure and in comparable geological conditions provided within the literature. The results indicated that although the bearing capacity of the pile group increases with increasing number of piles, the efficiency of the pile group is very important for a small number of piles. However, increasing of pile spacing has a positive effect on pile group efficiency depending on piles number and settlement level. The pertinence of the 3D numerical results of efficiency coefficient is judged by comparison with those obtained from the most popular formulas available in the literature.

A predicted model is also proposed which is validated with the obtained numerical results to a better goodness of fit.

This paper aims to investigate the responses of single piles and pile groups due to tunneling-induced ground movements in a two-layered soil system. The analyses mainly focus on the additional single pile responses in terms of bending moment, lateral deflection, axial force, shaft resistance and pile settlement. Subsequently, a series of parametric studies were carried out to better understand the responses of single piles induced by tunneling. To give further understanding regarding the pile groups, a 2 × 2 pile group with two different pile head conditions, namely, free and capped, was considered.

Using the PLAXIS three-dimensional (3D) software, a full 3D numerical modeling is performed to investigate the effects of ground movements caused by tunneling on adjacent pile foundations. The numerical model was validated using centrifuge test data found in the literature. The relevance of the 3D model is also judged by comparison with the 2D plane strain model using the PLAXIS 2D code.

The numerical test results reveal that tunneling induces significant displacements and internal forces in nearby piles. The magnitude and distribution of internal forces depend mainly on the position of the pile toe relative to the tunnel depth and the distance between the pile and the vertical axis of the tunnel. As the volume loss increases from 1% to 3%, the apparent loss of pile capacity increases from 11% to 20%. By increasing the pile length from 0.5 to 1.5 times, the tunnel depth, the maximum pile settlement and lateral deflection decrease by about 63% and 18%, respectively. On the other hand, the maximum bending moment and axial load increase by about 7 and 13 times, respectively. When the pile is located at a distance of 2.5 times the tunnel diameter (Dt), the additional pile responses become insignificant. It was found that an increase in tunnel depth from 1.5Dt to 2.5Dt (with a pile length of 3Dt) increases the maximum lateral deflection by about 420%. Regarding the interaction between tunneling and group of piles, a positive group effect was observed with a significant reduction of the internal forces in rear piles. The maximum bending moment of the front piles was found to be higher than that of the rear piles by about 47%.

Soil is a complex material that shows differently in primary loading, unloading and reloading with stress-dependent stiffness. This general behavior was not possibly being accounted for in simple elastic perfectly plastic Mohr–Coulomb model which is often used to predict the behavior of soils. Thus, in the present study, the more advanced hardening soil model with small-strain stiffness (HSsmall) is used to model the non-linear stress–strain soil behavior. Moreover, unlike previous studies THAT are usually based on the assumption that the soil is homogeneous and using numerical methods by decoupled loadings under plane strain conditions; in this study, the pile responses have been exhaustively investigated in a two-layered soil system using a fully coupled 3D numerical analysis that takes into account the real interactions between tunneling and pile foundations. The paper presents a distinctive set of findings and insights that provide valuable guidance for the design and construction of shield tunnels passing through pile foundations.

This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.

A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (U_x) and vertical displacement (U_z) relative to different values of lateral expansion of the column (0% to 15%).

The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (U_x) at the column’s edge and reducing vertical displacement (U_z) under the rigid footing.

In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.